...

Preparing the Aircraft

In order for this payload to fit into the aircraft, the battery hatch has to be modified slightly. A small cutout needs to be made where the antenna lines up on the battery hatch.

Align

Insert the payload into the aircraft. Then align the hatch as shown. Then mark the antenna mast location on the hatch.

...

Cut

Remove the foam around the mark to allow the antenna mast to pass through.

...

Installation

...

Assemble Aircraft

Assemble the aircraft and remove the battery hatch. Then align the camera into the payload bay.

...

Insert Camera

Assemble the camera into the payload bay by inserting straight down as shown.

...

Fully Seat

Ensure the camera is fully seated by pressing all of the mounting barbs down firmly into the payload bay.

...

Install Hatch

Install the battery hatch.

...