Versions Compared

Old Version 2

changes.mady.by.user Matt Skelton

Saved on

compared with

New Version Current

changes.mady.by.user Matt Skelton

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents
minLevel1
maxLevel1
Image Added

What to Check

Ensure wing spar is not damaged or cracked.

Ensure both wings fully snapped into place and wing pings inserted.

Check that wings stay attached securely when pulled hard.

Ensure wings fully pressed in and do not have slop or movement in the mechanical and electrical connection.

Image Added

Check that wings stay attached securely when pulled hard.

Perform the shake test as shown. Firmly press wings into the fuselage after completing.

Troubleshooting

Symptom

Solution(s)

Wing is not connecting or is hard to connect

  • Inspect spar joiner for damage.

  • Check electrical connectors for damage or debris.

  • Check mechanical connectors for damage or debris.

  • Inspect fuselage pocket and wing root for obstructions.

Wing pin is hard to insert

  • Press wing fully into fuselage so that the seam between the fuselage and wing is minimized.

  • Inspect wing pin hole in fuselage for obstruction.

  • Inspect wing root wing pin hole for obstruction.

  • Verify wing pin is not bent.