| Table of Contents | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
About
The 65R uses an internal solid state hard drive to store the captured imagery.
| Info |
|---|
The SD card in the camera is currently used for logging purposes. SD card image writing will be available in the future. |
Equipment
Camera Power Source
One of the following:
AC power to barrel jack cable
Aircraft with battery.
Laptop
Windows or Mac compatible.
External Hard Drive (OPTIONAL)
Offload Process
Power The Camera & Connect the USB-C Cable.
Use the AC adapter or the fuselage and aircraft battery to power the camera.
Connect the cable to the camera.
Connect the other end of the cable to the laptop.
Verify Network Connection
The camera will appear in the Wi-Fi manager and appear as a wired connection.
It will look like “Network XX” in most cases, where XX is some 2-digit number.
Open A File Browser
Access Data
In the address bar type the following link in:
\\192.168.143.141
Press enter.
Login
Username: sentera
There is no password.
Select Data Folder
Select Snapshots
Select Session Folder
Navigate to a session folder and copy it to the laptop.
Within the snapshots folder will be the session folders that are labeled with the timestamp from when the camera session was started.
The session folders are labeled in the following format:
YYYY-MM-DD_HH-MM-SS
Where the time (HH_MM_SS) is the UTC time at which the session started.
Inside of the session folders is where the folders containing the imagery are located.
Copy Files (Optional)
Copy the files from the camera to your laptop or external hard drive. This ensures the data is backed up and not lost when the internal storage is cleared.
Import
Import the data, either from the local copies or straight from the internal drive to the image processing software of your choice.
Common processing software:
FieldAgent
Pix4D
Metashape
DJI Terra
Complete
Remove the USB-C cable from the camera and power off.