Camera Power Source

One of the following:

• AC power to barrel jack cable

• Aircraft with battery.

USB-C Cable

For best results do not use cables over 3ft long.

Cable provided with payload

Laptop

Windows or Mac compatible.

External Hard Drive (OPTIONAL)

Power The Camera & Connect the USB-C Cable.

Use the AC adapter or the fuselage and aircraft battery to power the camera.

Connect the cable to the camera.

Connect the other end of the cable to the laptop.

Verify Network Connection

The camera will appear in the Wi-Fi manager and appear as a wired connection.

It will look like “Network XX” in most cases, where XX is some 2-digit number.

Open A File Browser

Access Data

In the address bar type the following link in:

\\192.168.143.141

Press enter.

Login

Username: sentera

There is no password.

Select Data Folder

Select Snapshots

Select Session Folder

Within the snapshots folder will be the session folders that are labeled with the timestamp from when the camera session was started.

The session folders are labeled in the following format:

YYYY-MM-DD_HH-MM-SS

Where the time (HH_MM_SS) is the UTC time at which the session started.

Inside of the session folders is where the folders containing the imagery are located.

Copy Files (Optional)

Copy the files from the camera to your laptop or external hard drive. This ensures the data is backed up and not lost when the internal storage is cleared.

Import

Import the data, either from the local copies or straight from the internal drive to the image processing software of your choice.

Common processing software:

• FieldAgent

• Pix4D

• Metashape

• DJI Terra

Complete

Remove the USB-C cable from the camera and power off.