| Table of Contents |
|---|
Latest Version
Version Number
180.6.2
Release Notes
Increased maximum airspeed from 47mph to 55mph.
Increased maximum distance between waypoints from 2500m to 3000m.
Improved landing performance.
Equipment
PHX Aircraft
PHX Battery
CommsBox
Windows Computer
Ethernet Cable (Recommended)
How to Update
Download Update File
Assemble and Power On
Assemble the PHX and the CommsBox.
Power the aircraft and CommsBox.
Connect to CommsBox
Connect the laptop to the CommsBox.
| Info |
|---|
It is highly recommended that the CommsBox is connected via Ethernet cable. |
Open and Connect to Fly PHX
Open Fly PHX and verify the connection to the aircraft.
Run Update File
Double click the download file to start the firmware update.
Use “more info” and “Run anyway” if these screens appear.
Allow Update to Execute
a terminal window will open and display these prompts.
First the old firmware is erased from the autopilot.
Then the new firmware will start being written to the autopilot.
Once the programming is complete a verification check is run.
The the autopilot is rebooted.
Verify Update Is Complete
Once the aircraft reboots the firmware update will be complete.
Close Fly PHX and Reopen.
This will prompt the firmware checker to rerun and get the latest system information.
Verify Firmware Version
Verify the shown firmware version matches the version downloaded.
