...

...

Base Station Operation

1. Assembly , and set up , and power on the Sentera Base Stationthe base station.

2. Assemble the PHX.

3. Install payload into the PHXConnect the base station to the CommsBox via Ethernet.

4. Power on the PHX.Connect the base station to the comms box via ethernetand CommsBox.

5. Wait for the Allow base station to complete the self survey -in, or input the known coordinates.Verify that the payload is receiving corrections informationor enter base station location.

6. Assemble the PHX and D4K RTK payload.

7. Power on the PHX.

8. Connect to Fly PHX.

9. Verify RTK fix type.

10. Verify that the camera has started a session.

...

NTRIP Operation

1. Power on the laptop and open connect to mobile hotspot.

2. Verify internet access is available.

3. Open the NTRIP Client.

4. Run strsvr.exe

5. Enter the approximate coordinates of the current locationlocation information into NTRIP Client options.

6. Start the NTRIP stream.

7. Assemble and power on the comms boxaircraft, payload, and CommsBox.

8. Connect the laptop to the comms box CommsBox via ethernet.

9. Start the correction system.

10. Assemble the Connect to Fly PHX.

11. Install the payload into the PHX.

12. Power on the PHX.

13. Verify the payload is receiving corrections data. Verify RTK fix type.Verify the camera has started a session.