Base Station Operation

1. Assembly and set up the base station.

2. Connect the base station to the CommsBox via Ethernet.

3. Power on the base station and CommsBox.

4. Allow base station to self survey or enter base station location.

5. Assemble the PHX and D4K RTK payload.

6. Power on the PHX.

7. Connect to Fly PHX.

8. Verify RTK fix type.

NTRIP Operation

1. Power on the laptop and connect to mobile hotspot.

2. Verify internet access is available.

3. Open the NTRIP Client.

4. Run strsvr.exe

5. Enter location information into NTRIP Client options.

6. Start the NTRIP stream.

7. Assemble and power on the aircraft, payload, and CommsBox.

8. Connect the laptop to the CommsBox via ethernet.

9. Connect to Fly PHX.

10. Verify RTK fix type.