Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

SOP for Base Station Operation

  1. Assembly, set up, and power on the Sentera Base Station.

  2. Assemble the PHX.

  3. Install payload into the PHX.

  4. Power on the PHX.

  5. Connect the base station to the comms box via ethernet.

  6. Wait for the base station to complete the survey-in, or input the known coordinates.

  7. Verify that the payload is receiving corrections information.

  8. Verify RTK fix type.

  9. Verify that the camera has started a session.

SOP for NTRIP Client

  1. Power on the laptop and open the NTRIP Client.

  2. Enter the approximate coordinates of the current location.

  3. Assemble and power on the comms box.

  4. Connect the laptop to the comms box via ethernet.

  5. Start the correction system.

  6. Assemble the PHX.

  7. Install the payload into the PHX.

  8. Power on the PHX.

  9. Verify the payload is receiving corrections data.

  10. Verify RTK fix type.

  11. Verify the camera has started a session.

  • No labels