About
Fly PHX can connect to FieldAgent to download field boundaries from your account.
This menu is also used to share Fly PHX logs with Sentera customer support.
Using these features requires an internet connection.
Field Boundary Import
Login
Enter your FieldAgent login information and press Sign In.
Once successfully signed in the green connected status will be displayed.
Download
Press the Download Field Boundaries button.
The download percentage will be displayed.
The download is generally pretty quick but may take more time if a large amount of boundaries are being imported.
Fly PHX does not support org hierarchies. If you are at the top of a hierarchy your account may try to import all child organization boundaries.
Using Imported Boundaries
The imported boundaries will be available during flight planning by using the Load Field button during the survey mission item planning step.
Fly PHX Logs
Disconnect from Aircraft
Before the most recent Fly PHX logs can be sent in the logging session must be ended. This is accomplished by pressing the disconnect button in the upper right hand corner of the Fly screen, or by closing the application.
The disconnect button will appear after one of the following:
The aircraft is powered down.
The CommsBox is powered down.
The host device is disconnected from the CommsBox.
Login
Sign in with your FieldAgent credentials.
Share
Add any comments you would like the Sentera customer support team to see in the optional message box.
Press the send button.
The logs may take a minute or two to begin sending depending on the size of the logs.
Once the logs begin sending a status percentage will be displayed.
A successfully sent status will be displayed when complete.
