Assembly

Owned by Matt Skelton
Last updated: Sept 22, 2023
2 min read

Preparation

Before assembling the PHX check the following:

  • Check the spar joiner for cracks, splinters, or other damage.

  • Check the pitot tube for clogs or damage.

  • Check the motor and propellers for debris or damage.

Before Installing the payload check the following:

  • SD Card – Present, less than 50% full.

  • Check lenses for dirt, dust, & smudges.

  • Pogo pins are not damaged.

How to Assemble - Video

https://www.youtube.com/watch?v=bxz6UazCHYY&list=PLhyH3jCsv6Jdyy7X72zuIuftSPolGm4_X&index=5

 

How to Assemble - Instructions

 

Spar

Install the spar joiner through the fuselage. The direction of the spar joiner does not matter.

 

Wings

Slide the wing(s) over the spar joiner and press into the fuselage until the wing is fully seated.

 

Wing Pins

Install the wing pins into the small holes on either side of the fuselage. Ensure they are fully seated such that the top of the pin is touching the fuselage foam.

 

Payload

Insert the payload into the fuselage and press down on all four of the mounting post to ensure they are fully snapped into place.

 

Battery

Install the battery straight down into the fuselage and secure it to the aircraft using all 3 of the Velcro straps.