CommsBox - Battery
- Matt Skelton
About
The CommsBox uses off the shelf portable batteries as a power source. There are two battery packs that are approved to be used with the CommsBox. One CommsBox battery is provided with each PHX.
Specifications
Info | Value |
|---|---|
Battery Life w/ CommsBox | 6 to 8 hours |
Approved Batteries
 | Anker Powercore II 10000 | Anker Powercore 10000 |
|---|---|---|
Size (in): | 3.8 x 2.4 x 0.9 | 3.6 x 2.4 x 0.9 |
Part Number | A1230011 | A1263 |
Output: | 5V @ 3A, USB-A | 5V @ 2.4A, USB-A |
Input: | 5V @ 2A, Micro USB-B | 5V @ 3A, Micro USB-B |
Image: | Â  |  Â |
Capacity (mAh): | 10,000 | 10,000 |
Charging
The CommsBox battery is charged via a micro USB cable. An AC wall charger and cable are provided with the PHX.
The CommsBox battery takes approximately 4.7 hours to fully charge.
The battery can be charged with most AC wall adapters and cables. A charger with an output of at least 2A @ 5V is recommended.
Â
Â