Summary Menu

Owned by Matt Skelton
Last updated: Sept 18, 2023
2 min read

About

The summary menu is the default landing page for the gear tab. It displays various information about aircraft hardware, sensors, and settings.

Airframe

The airframe category displays system information. The firmware versions of various system components can be found here.

System ID, Airframe type, and vehicle will be the same for all PHX.

Firmware Versions

Firmware Version

Autopilot Firmware.

Custom Fw

Part of the autopilot firmware version tag.

CommsBox

CommsBox firmware (not displayed on iOS).

Senthawk

Also known as the CommsBoard. This is the coprocessor on the autopilot.

Double 4K Payload

Double 4K payload firmware version.

 

65R Payload

65R payload firmware version.

 

 

 

Sensors

The sensors category displays the status of the sensors onboard the PHX.

In most cases the sensors should display as ready.

Users can calibrate the airspeed and compass via the sensors menu in the gear tab.

If the gyro or accelerometer read not ready, try rebooting the aircraft while sitting on level ground and allow to sit for 1 to 3 minutes. If that doesn’t work contact Sentera customer support.

 

Safety

The safety category displays the current safety settings values and/or actions.

Low Battery Failsafe

Return at critical level, land at emergency level.

Not user changeable.

RC Loss Failsafe

Not user changeable.

RC Loss Timeout

Not user changeable.

Data Link Loss Failsafe

Return mode failsafe action.

not user changeable.

RTL Climb To

Aircraft will climb to this altitude when return mode is activated.

Not user changeable.

RTL, Then

Not user changeable.

Loiter Alt

Not user changeable.

Land Delay

Not user changeable.

Â